Multi Gas Detector XA-4000II
Features
40 hours or more of continuous operation with a single AAA Battery (when used in long-life mode)
Compact and lightweight
70 (W) x 72 (H) x 20 (D) mm, approx. 130G
Sounding alarm, three flashing lights and vibrations
Alarm sound more than 95 dB/30cm
Ingress protection is IP67
Water and dust proof, can be used outdoors on a rainy day
Intrinsically Safe (Ex ia II CT 3)
Complies with hydrogen and acethylene explosion proof requirements.
Sensor life of 2 years
Technical Specifications
|
Model |
XA-4400II |
|
|
|
|
Target Gas |
Combustible Gas (Methane or Isobutane) |
Oxygen |
Hydrogen Sulfide |
Carbon Monoxide |
|
Detection Principle |
Catalytic Combustion |
Galvanic Cell |
Electrochemical Cell |
Electrochemical Cell |
|
Sampling Method |
Diffusion |
|
|
|
|
Detection Range |
0-100% LEL (101-110% LEL) |
0-25.0 vol % (25.1-50.0% vol) |
0-30.0ppm(30.1-50.0ppm) |
0-300ppm(301-2000ppm) |
|
Display Resolution |
1% LEL |
0.1 vol% |
0-35ppm: 0.1ppm (35-150ppm: 0.5 ppm) |
0-350ppm: 1ppm (350-2000ppm: 5 ppm) |
|
Alarm Set Value |
1st Alarm: 10% LEL 2nd Alarm: 30% LEL |
1st Alarm: 19.5vol% 2nd Alarm: 18.0vol% |
1st Alarm: 10.0ppm 2nd Alarm: 15.0 ppm |
1st Alarm: 50ppm 2nd Alarm: 150ppm |
|
Operating temperature/Humidity |
-20 to 50 degrees C, 30 to 85% RH (non condensing) |
|||
|
Continuous Use Time |
Approx. 40 hours when the long-life mode is On/Approx. 20 hours when the long-life made is off Approx. 1200 hours with out combustible gas sensor (at 25 degrees C, with out alarm, backlight Off) |
|||
|
Power source |
1 x AAA Panasonic alkaline battery |
|||
|
Display |
LCD |
|||
|
Gas Alarm |
Buzzer sound, Flashing RED Lamp, vibration, LCD (automatic recovery) |
|||
|
Intrinsically Safe |
Ex ia IIC T3, ATEX (pending) |
|||
|
Ingress protection |
IP67 |
|||
|
Functions |
Self-diagnosis (sensor trouble), Automatic air adjustment, Remaining battery lvel, peak hold, LCD backlight, Buzzer stop for gas alarm, Time and Temperature indication, Alarm test, Buzzer volume, silent mode, Long-life mode, Data logging (datalogger kit is necessary for logging) |
|||
|
Dimensions |
70(W) x 72 (H) x 26(D) mm (excluding protrusions) |
|||
|
Weight |
Approx. 130g(excluding battery) |
|||
|
Accessories |
Safety-pin band, alkaline battery, 2x filter element for replacement |
|||
|
Options |
Datalogger kit, soft case, belt clip |
|||
Price: